Builder Spotlight
October 2008 Issue
All About Avionics: We Came, We Saw
There are many ways to dig a hole. Here are ways to cut one in your panel.
There are seemingly few more mundane tasks than making holes, but there are as many ways to do them, as there are different sizes and shapes of holes. This month, Stein Bruch describes how to cut holes in the panel yourself, using tools you may already have around the shop.
To continue reading this entire article you must be a paid subscriber.
Subscribe to KITPLANES
KITPLANES® magazine is the world's #1 homebuilt aviation magazine. Written for people interested in building, flying, designing and maintaining their own amateur-built category, manned aircraft, each issue is packed with need-to-know information.
Already subscribe but haven't registered for all the benefits of the website? Click here.
Subscriber Log In
Forgot your password? Click Here.
Stolp SA-500 Starlet N23ME was completed in November of 2016 . The project spanned approximately 4 years. The Engine is a Franklin 4AC-199 E-3 (90 HP) with a Prince propeller. The Starlet is a ball to fly - everyone should have one! --Bill Prokes, Gilbert, Arizona
In April of 2011 I ordered a kit from Van's Aircraft--the E-LSA RV12, and I have been building it since then. Last fall (2017) I finally got the paper work finalized and got my airworthiness certificate from the FAA. There were just a couple of Service Bulletins that I wanted to take care of before the first …
N200HL started life as a KitFox Lite kit. The engine is a Rotax 503 with a 3.47:1 reduction. The motor mount, carbon full cowl and the gear legs with coil spring absorption are all original designs. Mounted to the 503 is a 70" Warp Drive 3-blade prop and spinner. Standard-grade aircraft tires with hydraulic disc …
At Sun 'n Fun 2018 we interviewed Jeff Schans, Lycoming's Sales manager and we asked about the popular Thunderbolt Engines. Watch the short Product Minute video as Jeff describes the benefits of the Thunderbolt product line and what it means for the aircraft homebuilder.
Dynon Avionics' latest-generation SkyView integrated avionics called the SkyView HDX has a newly designed bezel and user controls for easier use while flying in turbulence, plus brighter displays and a reworked touch interface. Larry Anglisano takes a product tour of the HDX with Dynon's Michael Schoefield in this video.
At Sun 'n Fun 2016, Dynon continued to push into the world of non-certified avionics with its SkyView SE, a less expensive version of its popular SkyView EFIS system. Paul Bertorelli prepared this video report.
The G5 is a self-contained electronic flight instrument, which can be interfaced with Garmin's G3X/Touch avionics and autopilot for backup and flight instrument redundancy. The GMA245 and remote GMA245R Bluetooth audio panels have advanced entertainment input functions and onscreen programming.
At Sun 'n Fun 2016, Just Aircraft is showing off its new Titan-powered SuperSTOL XL. Harrison Smith took Paul Bertorelli for a half-day demo flight in the new airplane, and here's his video report.
Kit manufacturer Zenith Aircraft Company has released a new 360-degree VR short video to showcase its kit aircraft and to promote the rewarding hobby of kit aircraft building and flying light-sport aircraft.
IMPORTANT CUSTOMER SERVICE NOTICE TO KITPLANES SUBSCRIBERS:
All mailed correspondence, including subscription invoices, renewals, and gift notices, will bear our address:
PO BOX 8535
Big Sandy, TX 75755
Third parties claiming to be selling KITPLANES subscriptions are not legitimate.