News
January 5, 2010
Wicks Welding Workshop Offered
As part of its continuing workshops program for aircraft builders, Wicks Aircraft Supply will offer a TIG welding workshop on February 27 and 28, 2010. Featuring “Mister TIG,” aka Wyatt Swaim, the event will be a hands-on experience with TIG welding equipment.
To continue reading this entire article you must be a paid subscriber.
Subscribe to KITPLANES
KITPLANES® magazine is the world's #1 homebuilt aviation magazine. Written for people interested in building, flying, designing and maintaining their own amateur-built category, manned aircraft, each issue is packed with need-to-know information.
Already subscribe but haven't registered for all the benefits of the website? Click here.
Subscriber Log In
Forgot your password? Click Here.
It started with a visit with the Rutan guru Robert Harris of what was the EZ Hangar in Covington TN, now EZ Jets. I wanted to build a Long Eze but Robert suggested using current information and technology instead of 1977 when the plans came out. From then on, this airplane was not a Long …
I had been researching gyroplane technology for the past 20 years and knew that the modern gyroplane was an amazing aircraft. After scoring a ride in a MTO Sport in July of 2015, I knew I had to have one. I was fortunate that a dealer and flight training in Searcy, Arkansas was only an …
Velocity 173 Fixed Gear Elite N653TS has taken just shy of 20 years to morph from several boxes of fiberglass parts to the plane you see here. Back in June 1997 I had just retired from the Army as a career helicopter pilot and wanted something to keep me active in aviation besides the typical …
Dynon Avionics' latest-generation SkyView integrated avionics called the SkyView HDX has a newly designed bezel and user controls for easier use while flying in turbulence, plus brighter displays and a reworked touch interface. Larry Anglisano takes a product tour of the HDX with Dynon's Michael Schoefield in this video.
At Sun 'n Fun 2016, Dynon continued to push into the world of non-certified avionics with its SkyView SE, a less expensive version of its popular SkyView EFIS system. Paul Bertorelli prepared this video report.
The G5 is a self-contained electronic flight instrument, which can be interfaced with Garmin's G3X/Touch avionics and autopilot for backup and flight instrument redundancy. The GMA245 and remote GMA245R Bluetooth audio panels have advanced entertainment input functions and onscreen programming.
At Sun 'n Fun 2016, Just Aircraft is showing off its new Titan-powered SuperSTOL XL. Harrison Smith took Paul Bertorelli for a half-day demo flight in the new airplane, and here's his video report.
Kit manufacturer Zenith Aircraft Company has released a new 360-degree VR short video to showcase its kit aircraft and to promote the rewarding hobby of kit aircraft building and flying light-sport aircraft.
Whether you are upgrading the audio system in an older LSA or experimental or building a new project, PS Engineering and Garmin have non-certified audio panels equipped with advanced features better suited for smaller cabins.
IMPORTANT CUSTOMER SERVICE NOTICE TO KITPLANES SUBSCRIBERS:
All mailed correspondence, including subscription invoices, renewals, and gift notices, will bear our address:
PO BOX 8535
Big Sandy, TX 75755
Third parties claiming to be selling KITPLANES subscriptions are not legitimate.