Data plates are required to show the manufacturer, model and serial number, and they must be legible. It’s highly unlikely that one like this would pass a ramp check.
![Aircraft designs now can be built in a fraction of the time necessary in the early days of homebuilding. [Credit: Adobe Stock]](https://www.kitplanes.com/wp-content/uploads/2026/02/AdobeStock_1336488.jpg?w=218&h=150&crop=1 "Kit Building Then and Now")
In Case You Missed It
Design Process: Flap Types
Last month we took a look at the trade-offs the designer should consider when...
![sideview shows the Better Half with the full VW case. [Credit: Legal Eagle Airplane]](https://www.kitplanes.com/wp-content/uploads/2026/02/Milholland-V-Twin_Side-View.jpg?w=324&h=160&crop=1 "Better Half VW")
Precious Metal
My wedding might not make it into Vogue, but I’ll be damned if it doesn’t make it into KITPLANES!
Aluminum data plates can be read from the back side if the rivets are drilled out. Front surface wear does not go all the way through aluminum.
The data plates are supposed to be stainless steel (fireproof).
bolted plate was not accepted by the Italian authorities
Comments are closed.