Tag: CAD aircraft design
![SR-1 cowl being integrated with spinner and cooling ducts. The cowl is assembled to itself/to the fuse primarily with countersunk #8 screws. [All images credited to Eric Stewart]](https://www.kitplanes.com/wp-content/uploads/2026/09/1KP.jpg?w=324&h=160&crop=1 "Custom Cowl Fabrication: Building the SR-1 Composite Cowl")
In Case You Missed It
Master Caution
My original intent for this month’s treatise was to produce the first installment of my upcoming Kitfox build series, which I have been greatly looking forward to. However, as often happens in life, life itself got in the way.
A Great Compromise
Building an airplane usually requires a long-term commitment, not entirely dissimilar to the one that is made when saying I do. Yet many builders lose sight of this when building, sometimes even forgetting that they have a spouse. The commitment to the project must be matched by the commitment to maintaining a spousal relationship, and a little forethought and planning can help both builder and spouse enjoy not only the process, but the end result.
Risk Tolerance
There’s only so much we can do to eliminate risk, so it becomes more about risk tolerance, which is usually different for everyone.