Tag: composite mold making
![SR-1 cowl being integrated with spinner and cooling ducts. The cowl is assembled to itself/to the fuse primarily with countersunk #8 screws. [All images credited to Eric Stewart]](https://www.kitplanes.com/wp-content/uploads/2026/09/1KP.jpg?w=324&h=160&crop=1 "Custom Cowl Fabrication: Building the SR-1 Composite Cowl")
In Case You Missed It
Debunking Deburring
If you are building an aircraft kit that requires drilling holes into metal parts, there is no doubt that the subject of deburring will get mentioned.
Making Sandable Foam Glue/Filler
An epoxy alternative thats easier to work with for low-stress, structural applications.
Light Stuff
Sport Pilot rules make it possible to fly a powered parachute or flexwing trike at night, but make sure you have the right equipment.