Rebuild Archives - KITPLANES

Home Tags Rebuild

O-290G case with the nose machined for flight use. The mounting lugs were not “countersunk” for conical bushings on this engine. Look for a later article on making the engine mounts.

A D For Effort

Andrew Robinson - December 5, 2025 1

In Case You Missed It

Laps and Lapping

Bob Hadley - December 15, 2020 0

Lapping was an important step featured in two recent columns. Last month’s gauge block...

Homebuilt Accidents: The Pilot’s Condition

Ron Wanttaja - January 18, 2021 2

Bushy-tailed optional, bright-eyed mandatory.

Aero ‘lectrics

Jim Weir - January 10, 2011 0

Proper sizing and selection of the wire that goes into an aircraft can have a profound effect on the efficacy of the installation.

Wind Tunnel

Barnaby Wainfan - September 18, 2015 0

Stiffness.