Dynon Group Launches ADVANCEDPANEL Express Panels for Van’s RVs

0

Advanced Flight Systems now sells pre-engineered VFR and IFR panels for five Van’s RV models, wired and bench-tested, at prices published up front.

Dynon Group has launched ADVANCEDPANEL Express, a line of standardized, pre-wired instrument panels for builders of Van’s Aircraft RV-7, RV-8, RV-9, RV-10 and RV-14 airframes. The panels come from the group’s Advanced Flight Systems (AFS) team in Canby, Oregon, which has engineered hundreds of custom panels through its ADVANCEDPANEL Complete program.

Express takes the layouts AFS has built most often and turns them into fixed configurations with prices posted on the company’s website. Instead of designing a panel from a blank sheet, the builder picks an airframe, VFR or IFR, a display size and a short list of options. An ADVANCEDPANEL specialist then confirms the price, deposit and lead time with the builder before anything is ordered. Nothing is charged online.

“In over a decade of experience and lessons learned from building hundreds of RV panels, we’ve created many similar panel designs,” said Kyle George, ADVANCEDPANEL operations manager. Express, he said, “takes the guesswork out of the equation for those who ‘don’t know what they don’t know.'”

The Configurations

Each airframe offers four core configurations. Base VFR is built on a single Dynon SkyView HDX display with one air data and attitude heading reference system (ADAHRS), an SV-GPS-2020 receiver, one SV-COM-760 radio and an SV-INTERCOM-2S intercom. Super VFR adds a backup ADAHRS, a second COM radio and the SV-AUDIO-6BTR audio panel, and on most airframes a second HDX display. Light IFR adds an Avidyne IFD 410 GPS navigator and a Dynon D30 backup display. Full IFR substitutes the IFD 440 GPS/NAV/COM. The RV-8 and RV-10 get a fifth configuration, Delux IFR, built around the IFD 540.

Every Express panel also includes the SV-EMS-220 engine monitor, a heated pitot tube with angle of attack (AOA), a two-axis autopilot with SV-42 servos and SV-AP-PANEL controller, an SV-KNOB-PANEL, Tosten stick grips, an SV-XPNDR-263 transponder for ADS-B Out, an SV-ADSB-472 receiver for ADS-B In traffic and weather, an Aithre carbon monoxide detector, a Wi-Fi adapter, antennas with RG400 coax, and an ACK E-04 406 MHz emergency locator transmitter (ELT).

Displays are offered in 10- and 12-inch sizes. On the RV-7 and RV-9, the website currently lists 10-inch displays only, priced separately for slider and tip-up canopies.

Wiring Through the ACM

Each panel is built around the AFS Advanced Control Module (ACM), which provides electronic circuit breakers for most of the aircraft’s electrical system in place of conventional bus bars and fuses. Avionics, lighting, trim and flaps connect through plug-and-play front and rear harnesses. The panel ships assembled, configured and bench-tested, with 11 x 17-inch color ACM wiring schematics and a step-by-step installation manual.

The standard configurations support P-MAG, SureFly, Lycoming EIS, LightSpeed and conventional magneto ignition, and AeroLEDs, FlyLEDs, Aveo Ziptips and Whelen lighting. Those choices are included in the price. A custom powder-coat finish or a dual-alternator installation adds $250 each.

Prices and Early Delivery

Published prices run from $33,650 for a 10-inch Base VFR panel in the RV-14 to $67,000 for a 12-inch Delux IFR panel in the RV-10. A 12-inch Full IFR panel for the RV-14 is $62,650. Prices reflect a 3% discount for payment by check or cash and exclude sales tax and shipping. Will-call pickup in Canby, a short drive from Van’s, is free.

Builders who want to install components that mount outside the panel can take delivery of them early. That payment is part of the panel price, not an added charge, and the warranty on early components does not start until the complete panel is delivered. For a 12-inch RV-14 Base VFR panel, the early components come to $13,025 of the $34,650 total.

Builders who want different avionics, a nonstandard ignition or lighting setup, or layout changes move into the ADVANCEDPANEL Complete custom program, starting from the closest Express layout. Express uses SkyView HDX displays only; Complete also offers the AFS AF-6600. Dynon Group says it plans to add aircraft from other kit manufacturers.

Configurations and pricing are at advancedflightsystems.com/advancedpanel-express.php, or call AFS at 503-263-0037.

LEAVE A REPLY

Please enter your comment!
Please enter your name here