Home Authors Posts by Ken Krueger

Ken Krueger

Ken Krueger
7 POSTS 0 COMMENTS
Ken Krueger is an aerospace engineer, pilot, aircraft owner, and homebuilder, having completed an RV-6 and a single-seat aircraft of his own design. Ken's company, Sky Designs Engineering, specializes in light aircraft design.

Rapid Prototyping and Experimental Design

3D-printed composite part molds, part 2.

Rapid Prototyping and Experimental Design

3D-printed composite part molds. By Ken Krueger.

Light Aircraft Fuel System Design

Part 3-one type doesn't fit all.

Light Aircraft Fuel System Design

Part 2-Every component is there for a good reason!

Light Aircraft Fuel System Design

Part 1-if its not broken, don't fix it!

Gas Vs. Diesel

Which Sportsman is best? It depends.

Flight Review: Point of Ignition

Builder Kurt Goodfellow has risen to the challenge of installing a Wilksch Airmotive WAM-120 diesel powerplant in his Van’s RV-9, and the proof is in the performance test results. By Ken Krueger.

In Case You Missed it

Risky Business

Unforeseeable risks in kit aircraft projects. By Sid Mayeux.

Rear Cockpit

Twice the fun and half the cost.

Aero ‘lectrics

Jim Weir takes a look at the performance of a DIY ground-plane antenna versus a factory-built rubber duckie on a handheld GPS receiver.

Toolcraft

The best tool for certain tasks may require a bit of ingenuity and home...