Found in the Fly-Market – one owner, sometimes hangared, a clear fixer-upper. No low-ball offers—they know what they’ve got!
In Case You Missed It
Design Process: V-Tails
A V-tail is a configuration where the horizontal stabilizer and vertical fin are replaced...
Build Your Skills: Composites (Part 7)
Author Bob Fritz explains how to set up a vacuum-bagging operation in your home shop, using readily available equipment and supplies, which will get you great results on small- to medium-size parts. The object is to mechanically squeeze out excess epoxy for a good-ratio part with maximum weight savings and strength.
Wind Tunnel
This month columnist Barnaby Wainfan takes a look at how the airplane responds in roll when the pilot is maneuvering. Two key factors are roll acceleration and the steady-state roll rate.
