No matter how well you equip the panel of your kit, there’s good reason to invest in a portable comm transceiver. Whether it’s for belt-and-suspender backup or for fetching clearances and listening to the airport weather, it’s no surprise that the portable comm soldiers on. Sporty’s is selling a new one—the PJ2—and it has some smart features and an attractive price. KITPLANES avionics editor Larry Anglisano has been putting the PJ2 through its paces and prepared this field report video.
In Case You Missed It
Horizontal Stabilizer Crack
In 2014 Van’s Aircraft put out a service bulletin for potential cracking in the...
Free Flight
Why do seemingly simple modifications wind up taking so much time to complete?
Unlimited Oil Cooling
Building a carbon fiber cooling duct for Czech Mate, the Unlimited class pylon racer.
Sikorsky S-38 Project
Building a 55%-scale, amphibious twin-engine flying boat seems like an ambitious project, and it is. But this former WW-II B-25 commander with four homebuilt aircraft already under his belt tackled it anyway. By Rick Lindstrom.


![2026 Avionics and Lights Buyer’s Guide [Credit: JetStream Rider]](https://www.kitplanes.com/wp-content/uploads/2026/04/AdobeStock_345999332.jpg?w=218&h=150&crop=1)
![Dynon Unveils Scalable Engine Monitoring for Kitbuilders [Credit: Dynon]](https://www.kitplanes.com/wp-content/uploads/2026/04/EMS-stand-alone_HDX.png?w=218&h=150&crop=1)








While having the ability to plug headset connectors directly into the portable transceiver is a worthwhile improvement, it could further improved if these transceivers had Bluetooth capability,. This would not just simply avoid the need to plug in headset cables, but would allow both pilot and co-pilot to hear and communicate on the device. Additionally, Bluetooth capability would be very convenient outside the cockpit by connecting to headsets and in-ear devices commonly used with mobile phone.
Comments are closed.