Facebook Twitter Youtube
Home Tags F1 rocket

Tag: f1 rocket

Team Rocket Previews New Wing Design for F1

Louise Hose - 0
Finished egress handle with striping, fastened in place with #8 screws.

Easy Egress Handle

Paul Dye - 0

The Canopy Takes Shape—Spring Boost for the F1 Rocket Project

Paul Dye - 3

Fiberglass Magic: A Better-Fitting Rear Seat Back

Paul Dye - 0

Adventures in Pro-Seal

Paul Dye - 0

Beware…. Not All H-5000-2’s Are the Same!

Paul Dye - 0

Fisheyes!

Paul Dye - 0

Reverse Engineering Heated Seats

Paul Dye - 3

Trimming a Tube Square

Paul Dye - 1

Easy Servo Wiring Trick

Paul Dye - 0
1234Page 1 of 4

In Case You Missed It

Too Many Holes

Vic Syracuse - 0
Multiple drilled holes on an RV-6 elevator spar.

Spinner Bulkhead Clocking

Bob Hadley - 3
Spinner woes were the topic of midsummer musings on Van’s Air Force this year....

Two Years On

Tom Wilson - 18
Habitual readers of this column know I’m not a fan of ADS-B, if only...

Ask the DAR

Mel Asberry - 0
Engine data plate, airworthiness certificate issued by an IA, ELT requirements with ADS-B.
© 2026 Firecrown Media Inc. All rights reserved. ® KITPLANES is a registered trademark of Firecrown Media Inc.