Home Authors Posts by Bob Hadley

Bob Hadley

Bob Hadley
137 POSTS 7 COMMENTS
Bob Hadley is the R&D manager for a California-based consumer products company. He holds a Sport Pilot certificate and a Light-Sport Repairman certificate with inspection authorization for his Jabiru J250-SP.

Fun With Fly Cutters

0
Did you ever wonder what kind of tool makes those graceful machine marks on factory-made brackets and manifolds?

Home Shop Machinist

0
Titanium-when and where to use it and how to machine it.

Home Shop Machinist

4
Totally tubular: Tips for tube notching.

Home Shop Machinist

0
Tapping your inner thread.

Bandsaws—Cutting Through the Clutter

0
Bandsaws—cutting through the clutter.

Home Shop Machinist

0
The lathey guy’s guide to work holding.

Reamer Madness

0
There are a number of things you will get good at when building an airplane. At or near the top of the list is...

Home Shop Machinist

0
Manifold destiny—3D printing a manifold.

Home Shop Machinist

2
3D printing.

Home Shop Machinist

0
DIY safety wire drilling.

In Case You Missed It

Using a Volt-Ohm Meter

1
Because of their extremely low operating current, digital multimeters do not do a...

Always Attack

0
As I settle into my new life in Oregon, where I know hardly anyone...

Kit Stuff

0
Drawing on experience; by cartoonist Robrucha.

To Launch A Light Sport

0
Author Bob Fritz got the bad news that he would likely not pass his FAA medical and was faced with a choice: Finish the RV he was working on and resign himself to flying with a partner, or try to find a suitable Light Sport Aircraft that he could build and fly solo. In this first installment in the series, he details his search for the right design and reveals the decision he ultimately made.