What's in YOUR Cockpit?

3
I spent most of my life living - and flying - in the middle of the country. It's hard to find places between the...

Kitplanes Flies Cubcrafters EX-3

0
Featuring an airframe several hundred pounds lighter than a traditional Super Cub, but with 180 or 186 HP and a constant speed prop, this is the high-performance airplane in their line-up, and its Experimental!

HUD's Up!

0
I spent some time this weekend testing a new Heads Up Display product from Grand Rapids Technologies, and I think that folks who have...
Dave-Armando-Kitfox-Speedster-Model-V

Dave Armando’s Kitfox Speedster Model V

0
After 6 years of building my 2001 Kitfox Speedster Model V was flown.
dave-armando-rotorway-162F-helicopter

Dave Armando’s Rotorway 162F

0
After 600 hours of build time my 2008 Rotorway 162F helicopter departed the earth. First flight was from my driveway after pushing it out...

Sport Expo: Building Airplanes Is Getting Easier

0
Last week, just as I was girding to launch into the savage hinterlands of central Florida where Sebring is situated, I got a note...

Windy at Sebring

0
The Light Sport Expo in Sebring Florida is in full swing for the 3rd day. Lots of vendors and foot traffic as well. Unfortunately,...

The US Sport Aviation Expo is Underway!

0
Sebring, Florida, is the home of the annual US Sport Aviation Expo, and our representative on the field sent us this picture this picture...

Garmin Trade-In Towards an Avidyne IFD

0
Get up to $8,500 for your GNS 430/480/530 WAAS or non WAAS when you upgrade to any Avidyne slide-in replacement. Avidyne is offering up to...

Folkerts Murphy Super Rebel

2
Wednesday, January 24th, 2017 at high noon, N25SR, a Murphy Super Rebel SR2500, took to the skies for approximately 45 minutes. I bought the kit...

In Case You Missed It

Can You Calibrate Your Hand?

3
Every aircraft kit is designed with a number of nut and bolt fasteners that...

A Chock Talk

1
About a year ago my son whittled us some traveling chocks, just bits of...

Tube-Notching Made Easy

6
Tubemiter software creates perfect templates for fishmouths. By Jeff Point.

Tips for Installing Your Props Properly

0
It pays to be thorough and follow the manufacturers instructions to the letter when installing a prop on your homebuilt.