A Gyroplane Sticks Out at HBC

2
A casual tour of Sun 'n Fun’s Homebuilt Camping (HBC) grounds will reveal the usual suspects; scores of RVs, a Murphy Rebel or two,...

Aithre’s Healthview Multifunction Display

0
Aithre Aviation debuted its Healthview biometric monitor at Sun 'n Fun, offering health tracking and oxygen control for aircraft.

Meet the Aeropup USA Lightweight LSA Bushplane

1
At Sun 'n Fun 2023, we checked in with Don Fielden, who is bringing in the Australian-created Aeropup. With a base kit price of...

CubCrafters Unveils the New Carbon Cub UL

1
One of the most long lived LSA designs is CubCrafters' Carbon Cub. From the outset, it has been a light, well-powered design and now,...

Old Pilot’s Camper Journal #4

0
A fly-in airshow’s campground is a little city, filled with different neighborhoods, various stores and vendors and even a few entertainment and gathering venues....

Steve Ashby Visits the Parts Exchange

0
If you're at Sun 'n Fun 2023, you need to visit the parts exchange building. Looking for a project? Need some cheap airplane parts?...

Good BBQ at SnF

0
There are a plethora of food vendors at Sun 'n Fun to cater to most any taste or gastronomical predilection. Selections range from county...

What’s Happening at uAvionix for Sun ‘n Fun 2023?

0
Shane Woodson breaks down where uAvionix is with the development of the AV-30 and its other avionics/lighting products in this video from Sun 'n...

Old Pilot’s Camper Journal #3 – Sun ‘n Fun 2023 Edition

0
Camping at a fly-in is an experience of all of the senses, the pastel sunrise you see when you unzip the door of your...

Beringer Introduces the Shock Wheel at Sun ‘n Fun

0
Homebuilts with spring steel landing gear have the advantages of light weight and simplicity over traditional shock absorber or trailing link arrangements. What they...

In Case You Missed It

Panels in Days, Not Months

0
Pre-built panels are an easy way to save time and eliminate frustration during avionics installation. By Bruce Eicher.

Fitting an RV-7A Cowl

0
Part 2: Trimming and installing the top and bottom cowl halves.

Metal Magic: Laying Out Lines of Rivets

2
In this episode Paul Dye explains how to lay out lines of rivets on...

Making Parts

0
Building an airplane is, without a doubt, a daunting task. Whether you are starting...