Zenith Open House and Fly-In

0
Zenith Aircraft Company is hosting its 27th annual Open Hangar Day & Fly-In on September 22 at its factory at Mexico Memorial Airport in...

Aerocreeper

0
AirVenture is long over, but we're still digging out from the information deluge the show provides. A good example is the Aerocreeper, an adjustable...

One Week Wonder First Flight – 3D view

0
Van's Aircraft has released a nearly half-hour long, in-cockpit video of the first flight of the One Week Wonder, an RV-12iS built by volunteers...

One Week Wonder Build Captured in Less Than Two Minutes

0
A time-lapse video of the complete build of the One Week Wonder, a Van's RV-12iS constructed during the EAA's AirVenture, is now available. The...

Only One Way to Skin This Wing

0
There may be more than one way to skin a feline (I've never tired), but if you stray from the instructions while skinning this...

Westbound After the Show

0
  Oshkosh 2018 is in the books, and hopefully, pilots from all parts of the country have made it home safely. It was a good...

AirVenture 2018 Facts and Figures

0
The EAA has tallied up the numbers for this year's AirVenture and the numbers are good. "A 'perfect' event may be unattainable, but AirVenture 2018...

One Week Wonder — Day 7 — First Taxi

0
The Van's elves continued working on finishing up the RV-12iS build on Saturday night and had it ready for its airworthiness certificate inspection and...

Repair Barn to the Rescue

0
The Aircraft Repair Barn at Oshkosh is where airplanes that have mechanical problems or damage go to be repaired during AirVenture.  The Repair Barn...

Short-Winged Zenith

0
We all know that competition between kit companies can be fierce, and Zenith Aircraft LLC seems to be taking a stab at what many...

In Case You Missed It

2014 Rotorcraft Buyer’s Guide

1
Essential knowledge for choosing and flying Experimental rotors. By Roy Beisswenger.

Completions

0
Builders share their successes.

Light Stuff

0
Roy Beisswenger takes a look at the maintenance requirements for the lighter side of aviation including ultralights and Light Sport Aircraft.

Aero ‘lectrics

0
Jim Weir takes a look at low-cost and free CAD software available to help you document modifications you've made to your aircraft.