hose clamp

Tame The Hose Clamp Tail for Safer Maintenance

0
A simple clamp-tail trick to save your skin—and maybe score points with judges—when securing EGT sensors.
Zenith Fly Into Summer

Zenith Fly Into Summer is June 21st

0
The “Fly In to Summer” open house and fly-in will take place at the central Missouri kit-aircraft factory on Saturday, June 21

AirVenture Type Gatherings

0
Don't miss the type-specific gatherings at AirVenture Oshkosh — connect with fellow builders and pilots of your aircraft type.
Sonex Highwing

Sonex Highwing First Engine Start

0
The Sonex Highwing prototype has completed its first engine run and is nearly ready for flight, targeting a debut at AirVenture 2025.
vans rv-15 flap test new wing

RV-15 Test Flight With a New Wing

0
RV‑15 flies with new wing and updated flaps—perfect handling, stable, and on track for Oshkosh.

Magnet Trick for Precise Hole Placement

1
Use magnets to mark precise hole locations through metal or composite firewalls—no guessing, no misaligned holes.
VoltAero hybrid propulsion powerplant

VoltAero Debuts Hybrid Propulsion Aimed at Kit Market

0
VoltAero's new HPU 210 hybrid-electric powerplant blends motorcycle-derived horsepower with electric boost—but details on the battery remain elusive.
oshkosh live

FLYING’s ‘Oshkosh Live’ Returns for Year 2

0
Expanded livestream coverage brings aviation’s biggest week to viewers around the world—live from the heart of EAA AirVenture.
edge tool for bending sheet metal

DIY Edge Tool for Canopy Skirts

1
A simple DIY tool puts a sharp crease into canopy skirts when edge-breaking tools fall short—just bring some wrist strength.
Main EarthX battery in the aircraft

Internal Power Milestone—EarthX Battery for the F1 Rocket Project

2
The F1 Rocket project hits a major milestone—electrical and avionics systems now run independently on EarthX batteries.

In Case You Missed It

custom heat exchanger

Custom Heat Exchanger Fabrication

0
Designing and fabricating custom radiator and intercooler systems with packaging challenges.

National Test Pilot School

0
There's always more to learn (Part 1).

Cut the Can, Man

1
Inspecting your filter after an oil change is a good idea, but what tool is best for opening the can? Bob Fritz tests the gamut of oil filter cutters so that you don't have to.

Product Review: Garmin eLearning for the GPSMAP 696

0
Marc Cook tries out Garmins eLearning program for the GPSMAP 695/696.