RANS Announces S-20 Raven

0
As a replacement to the Coyote II S-6S, RANS announced the S-20 Raven. The new design is a side-by-side high wing and its performance...

EAA Says Fight Over Controllers Not Over

0
EAA Chairman Jack Pelton says the effect of the FAA's imposition of fees for air traffic controllers at AirVenture will ripple through the industry...

Dynon Avionics Acquires Advanced Flight Systems

0
As of today (July 22nd, 2013), Dynon Avionics and Advanced Flight Systems (AFS) have joined forces, with the acquisition of AFS by Dynon. Advanced Flight...

Levil Technology’s New iLevilAW ADAHRS

0
Levil Technology is out with a new portable ADS-B unit that's really a miniature ADAHRS.

Have You Ever Scared Yourself?

0
Here at Kitplanes, we are not just dedicated to helping people find, build and fly their experimental aircraft - we want to make sure...

Keith Hedrick's Rans S7S

0
After 3 yrs and a lot of help from my friends, 74VK took to the air. This is a great flying airplane and a...

Richard Yerian’s GlaStar

0
I started building the GlaStar in 1996 with the help of my wife Judy. The time to complete it was 17 years. The project...

Dynon ships new Comm Radio, Intercom, and Skyview software 6.0

0
Dynon has released three new products that were announced at Sun 'n Fun in April: a COM radio, Intercom, and SkyView firmware 6.0 with...

Kurt Nielsen's Baby Lakes

0
My plans-built Baby Lakes has been 31 years in the making before first flight on 22 May, 2013. I took a long break while...

Kurt Nielsen's Pulsar

0
This Pulsar 1 was born with a Rotax 582 and flew first time in 1998. After 6 hours I changed to an early Jabiru 2200a (#530)...

In Case You Missed It

Aithre Illyrian Smart Pulse Oximeter

0
For full-time SpO2 monitoring, stick the Illyrian under the headset and let the app do the rest.

Shop Tips: Undrilling a Hole in Steel

1
A brass block makes it easy.

Checkpoints

0
Maintenance.

DIY Wind Indicator

4
Chuck Deiterichs description of a do-it-yourself wind indicator project includes tips, drawings, a parts listing, in-progress photos and a look at the finished product. His experimentation with the highly visible design takes the guesswork out of doing it right.