Metal Workshop Setup
KITPLANES Magazine, March 2003 Every great homebuilt starts with a comfortable and efficient workshop.By Ken Scott So you've met the homebuilt airplane of your...
Homebuilt vs. Certified
Seemingly two peas in a pod are the GlaStar and its factory-built derivative, the OMF Symphony. We flew both of these wonderful two-seat aircraft to get a handle on what either FAR Part 23 certification or the freedom of homebuilding means to those facing such a delectable decision. By Ed Wischmeyer
![Last Bits Careful planning and determination will get you to your goal of building and flying your own airplane. [Credit: AdobeStock]](https://www.kitplanes.com/wp-content/uploads/2026/05/Pulsar-Sunset.jpg?w=534&h=462&crop=1)
![Winging It [Credit: AdobeStock]](https://www.kitplanes.com/wp-content/uploads/2026/05/AdobeStock_262642207_AGCuesta.jpg?w=265&h=198&crop=1)
![Think Like a Builder Lowell Farrand spent years serving as an FAA DAR and is in the EAA Hall of Fame. He offers sound advise to builders. [Credit: Bill Wilson]](https://www.kitplanes.com/wp-content/uploads/2026/05/unnamed-4.jpg?w=265&h=198&crop=1)
![2026 Engine Buyer’s Guide The 160 hp turbocharged Rotax 916iS is a four-stroke piston engine with redundant electronic fuel injection and ignition. [Credit: BPR Rotax]](https://www.kitplanes.com/wp-content/uploads/2026/05/PIC_916-iS_iSc-2.jpg?w=265&h=198&crop=1)
![Manual Starting Methods The alternative to bending down as the propeller is pulled through the compression stroke is to keep the back straight and bend the knees slightly, stepping away in a crouch. [Credit: LeRoy Cook]](https://www.kitplanes.com/wp-content/uploads/2026/05/IMG_1519-scaled.jpg?w=265&h=198&crop=1)




