Wittman Buster

Special 20 “Buster” Replica On Display in Homebuilder’s Hangar

0
One of the most successful airplanes in air‑racing history—Steve Wittman’s Chief Oshkosh, later reconfigured as the Special 20 “Buster”—will be on display all week in the Homebuilders Hangar,...
paul dye at oshkosh

Oshkosh Without an Airplane

1
What is EAA AirVenture like without the thrill of the FISK Arrival or the worry of watching the weather? This pilot finds out by leaving his airplane at home.
oshkosh arrivals

Oshkosh Sunday Begins

0
As the atmosphere wakes up with thunderstorms about 60 miles south of Oshkosh this Sunday morning in July, a small but growing line of...
brown arch at airventure

The Opener!

0
Every year when I get to AirVenture, one of my first stops is the Brown arch. Why? Well it started out that we needed...
vic arriving at airventure

Arriving at AirVenture

0
The grounds are already buzzing with aircraft and activity!
oshkosh HBC volunteers

Meet Your HBC Volunteers

0
Nowhere is the sense of community stronger at AirVenture than at the Homebuilt Camping Pavilion, all thanks to the volunteers who make it a home away from home.

Mooneys Open the Door

0
The group of nearly 70 aircraft arrived Friday evening to avoid bad weather, clearing the 10 a.m. Saturday arrival slot.
rv-15 at oshkosh

Van’s RV-15 Arrives at the Show

0
The much-anticipated Van's RV-15 prototype has arrived at AirVenture. See the work-in-progress high-wing bush plane on display all week.
Sonex Highwing third flight

Sonex Highwing Pricing Announced

0
Sonex is now accepting full kit orders for its much-anticipated Highwing. We have the official pricing, initial flight test data, and expected delivery timelines.

Van’s Flight Test Flight With the New RV-15 Tail

1
Van's tests RV-15 with new, longer tail cone ahead of AirVenture. Rian Johnson flew the updated design.

In Case You Missed It

Wheeler Express illustration

Wheeler Express—Yesteryear’s Homebuilts

1
The Wheeler Express dazzled with sleek performance and bold promises but ultimately struggled with stability issues and company misfortunes.

Toolcraft

4
The best tool for certain tasks may require a bit of ingenuity and home...

Night Flight

2
The theme of this month’s treatise is centered on flight operations at night. But...

The Home Machinist

0
What do you do if you want to cut a longer-than-usual taper? Well, first you'll need to create a simple tool from some round stock that will provide target zones for your dial indicator, and then you may need to buy some more tools-what a shame! Home Machinist Bob Fritz takes you through the process. Hint: Choosing the right Morse Taper is critical.