The Fellowship of the Wing
In the classic J.R.R. Tolkien trilogy Lord of the Rings, a small band of intrepid adventurers are sent on a near-impossible mission—to save the...
Toolcraft
The best tool for certain tasks may require a bit of ingenuity and home shop fabrication.
The purpose of this treatise is twofold. First it’s...
Unforeseeable Experiences
Of this I’m convinced; had I arrived in Fargo, North Dakota in a Skyhawk, Sundowner or Cherokee instead of a homebuilt, my brief stay...
The Perils of Cartooning About Avionics
Whenever I try to cartoon about avionics, all I get is resistance.
A Chock Talk
About a year ago my son whittled us some traveling chocks, just bits of 2-inch aluminum angle Swiss-cheesed to save weight. We’re a performance...
The Lessons We Learn
It wasn’t the call I expected from the ferry pilot. Somewhere on the leg into Bloomington, Illinois, the GlaStar started running strangely. On the...
The Big Toot
The Big Toot Tommy Meyer built is not the two-seat biplane his father envisioned. “It was going to be a side-by-side version of Little...
Turbine Temptation: Wiring, Avionics and Plumbing
The systems are simple but space is tight, so plan ahead.
Findlay Punch
Hole-making punches, also known as knockout punches, are a quick and easy way to make accurate holes in aluminum sheet. Punching works by shearing...
![Post-Flight Maintenance Debrief Maintenance technician William Vergonet conducts an inspection on a Cub. [Credit: Lisa Turner]](https://www.kitplanes.com/wp-content/uploads/2026/09/IMG_3535.jpg?w=265&h=198&crop=1)
![Life Lessons From Building an Airplane Pat McKiernan has found that he and his dad who built this beautiful RV-7 simply learned to enjoy the build. [Credit: Bill Wilson]](https://www.kitplanes.com/wp-content/uploads/2026/08/Builder.jpg?w=265&h=198&crop=1)
![FAA MOSAIC Rule Fully Implemented [Credit: AdobeStock]](https://www.kitplanes.com/wp-content/uploads/2026/08/AdobeStock_51865118.jpg?w=265&h=198&crop=1)
![What Is a Liaison Engineer? My 36 year old clipboard from when I started at Boeing. Engineering ruler and fastener/fastener hole cheat sheets. [Credit: Andrew Robinson]](https://www.kitplanes.com/wp-content/uploads/2026/08/Liaison_clipboard.jpg?w=265&h=198&crop=1)













