Turbine Temptation: Final Integration and Testing
It looks almost finished, but there’s still much to do before the jet is ready to fly.
A Wooden Kneeboard for Tablets
While I owned my Fisher FP-404 (“Restoring a Stored Homebuilt,” February 2017), I was using an Android smartphone running the free Avare navigation app...
Sporty’s PJ2
For a couple of hundred bucks, why argue about whether a handheld VHF com radio is worth having? Top-of-the-line tablets can cost five times...
Home Shop Machinist: Power Polishing Promise
Back in the February 2019 issue of KITPLANES®, I promised a column about polishing on the lathe. I’m finally able to make good on...
Special Delivery
There are events in your life where you will always remember the time, place and what you were doing when they happened: September 11,...
ADS-B, Eh?
In the December 2019 issue of Kitplanes®, Larry Anglisano took us on a scenic journey of what ADS-B is going to look like from...
Alternate Air Opening
This was discovered on an aircraft during a condition inspection. It really was a poor installation. Nonetheless, the aircraft had been operating on unfiltered...
Design Process: Wing Design
At this point in the design process, we have gotten the airplane sized, balanced, and after six months of consideration gotten the landing gear...
![Post-Flight Maintenance Debrief Maintenance technician William Vergonet conducts an inspection on a Cub. [Credit: Lisa Turner]](https://www.kitplanes.com/wp-content/uploads/2026/09/IMG_3535.jpg?w=265&h=198&crop=1)
![Life Lessons From Building an Airplane Pat McKiernan has found that he and his dad who built this beautiful RV-7 simply learned to enjoy the build. [Credit: Bill Wilson]](https://www.kitplanes.com/wp-content/uploads/2026/08/Builder.jpg?w=265&h=198&crop=1)
![FAA MOSAIC Rule Fully Implemented [Credit: AdobeStock]](https://www.kitplanes.com/wp-content/uploads/2026/08/AdobeStock_51865118.jpg?w=265&h=198&crop=1)
![What Is a Liaison Engineer? My 36 year old clipboard from when I started at Boeing. Engineering ruler and fastener/fastener hole cheat sheets. [Credit: Andrew Robinson]](https://www.kitplanes.com/wp-content/uploads/2026/08/Liaison_clipboard.jpg?w=265&h=198&crop=1)












